MAXSHARER Grounding Pillow Case with Silver Fiber Organic Cotton

• Calmer mind, easier nights
  Many users report less anxiety and a less “wired” feeling at bedtime (advocate claim)

• Deeper, more continuous sleep
  Gentle earthing contact helps you settle faster and stay asleep longer (advocate claim).
  
• Lower indoor body voltage
  Provides a grounded reference so everyday static can dissipate while you rest (mechanism; not an EMF shield).
  
• Everyday ache & inflammation support
  A simple nightly habit that complements recovery-focused routines (advocate claim; experiences vary).
  
• Boosts morning energy & mood
  Wake feeling more collected and ready for the day (advocate claim).
  
• Fresher pillow surface
  Silver fibers add natural antimicrobial resistance to help keep the pillow feeling clean.
  
• Cool, breathable comfort
  400-thread-count organic cotton stays soft against skin for all-night comfort.
  
• Pairs with your setup
  Works seamlessly with grounding sheets or mats for head-to-toe coverage.
  
• 60-second routine
  Slide on, snap the cord, plug into a grounded outlet—done.

• Fabric
  Organic cotton blended with conductive silver fibers; latex-free and skin-friendly.
  
• Conductive composition
  ~91–94% organic cotton with ~6–9% silver fiber for full-surface conductivity.
  
• Thread count
  400-TC breathable weave for cool, soft, all-night comfort.
  
• Color & pattern
  White, subtle plaid weave (model SF-002).
  
• Size
  Standard/Queen 20 × 30 in (≈50 × 75 cm) envelope design; fits most pillows.
  
• Grounding connection
  10 mm snap tab on the pillowcase connects to the included grounding cord.
  
• Cord
  15-ft (4.5 m) detachable grounding cord; designed for easy nightly setup.
  
• Safety resistor
  Inline 100 kΩ resistor in the cord to limit current in the unlikely event of a fault.
  
• Chemicals
  No high-concern chemicals reported.
  
• Care
  Machine wash cold with mild detergent; avoid bleach, fabric softener, and high heat to preserve conductivity.
  
• In the box
  Grounding pillowcase · 15-ft grounding cord · Quick-start guide. Selected regional wall adapter (US/EU/UK/AU-NZ) · Quick-start guide.

1. Plug in: Insert the regional adapter into a properly grounded wall outlet.
2. Connect the cord: Snap the 10 mm connector onto the pillowcase tab.
3. Dress the pillow: Slide your pillow into the grounding pillowcase and close the envelope.
4. Route safely: Run the cord along the bedside so it isn’t pinched by the bed or tripped over.
5. Make contact: Rest with bare skin on the pillowcase (best conductivity).
6. To disconnect: Unplug from the outlet first, then detach the snap.

• Best contact
  Bare skin works best. Thin cotton can still conduct lightly, but direct skin contact is ideal.

• Starter routine
  Use nightly. Start with full-night contact, or 30–60 minutes if you prefer to ease in.

• Pair for full coverage
  Combine with a grounding sheet or mat for head-to-toe contact.

• Verify ground (optional)
  If you’re unsure the socket is grounded, test with a simple outlet tester before first use.

• Travel tip
  Pack the pillowcase and cord; use only verified grounded outlets. Avoid ungrounded adapters.

• Quick care
  Unplug before washing. Machine wash cold with mild detergent; avoid bleach, fabric softener, and high heat. Air-dry or low heat.

Electrical path to ground
The pillowcase’s conductive silver fibers connect (via the snap, cord, and wall adapter) to your building’s ground. This provides a low-resistance path for excess static on your body to dissipate while you sleep.

Equalizing body voltage
When your skin touches the conductive fabric, your body is referenced to earth potential. This can lower measured body voltage relative to nearby indoor electrical fields, so you feel less “charged.”

Role of the 100 kΩ inline resistor
The detachable cord includes a 100 kΩ safety resistor that limits current in the unlikely event of a fault or surge, while still allowing tiny electrostatic charges to drain away.

Why contact area and moisture matter
More skin contact (cheek, neck, side of face) improves conductivity. Slight skin moisture or thin cotton can still conduct; bare skin works best.

What you may notice
Fewer static “zaps” from bedding and a calmer, less wired feeling at night. Experiences vary; this is a wellness accessory, not a medical device.

About EMF
The pillowcase does not block RF/EMF like a shield. It simply gives your body a grounded reference that can lower indoor body-voltage readings.

What it doesn’t do
It doesn’t power anything, charge you, or filter household electricity. It’s not a cure or a replacement for medical care.

Simple check
Use a basic outlet tester to confirm the socket is grounded. You can also measure a drop in body voltage with a handheld multimeter when touching the pillowcase.

• Grounded outlet required
  Use only with a properly grounded socket. Do not modify plugs or use ungrounded adapters.
  
• Unplug during storms/surges
  Disconnect the cord during thunderstorms, power surges, or when not in use for extended periods.
  
• Medical considerations
  If you use implanted medical devices (e.g., pacemaker) or take blood thinners, consult your physician before use. This is a wellness accessory, not a medical device.
  
• Indoor, dry-area use
  Keep away from liquids, humidifiers, heaters, and high-humidity environments. Do not use if the pillowcase or cord is wet.
  
• Cord routing & connection
  Snap the 10 mm connector firmly to the pillowcase tab. Route the cord along the bedside so it isn’t pinched by the bed, pulled, or tripped over. Do not place under electric blankets or heated pillows.
  
• Supervise children & pets
  Avoid chewing or pulling on the cord. Use under adult supervision where appropriate.
  
• Inspect before use
  Check the cord, snap, and adapter for wear or damage. Stop using if you see cuts, fraying, cracks, or loose fittings.
  
• Cleaning
  Unplug and detach the cord first. Machine wash the pillowcase cold with mild detergent. Avoid bleach, fabric softener, and high heat (they can reduce conductivity). Air-dry or tumble low.
  
• Storage
  Store the pillowcase folded in a cool, dry place away from sharp objects and direct sunlight. Keep the cord loosely coiled.
  
• Verification
  If unsure the socket is grounded, test with a basic outlet tester before first use.
  

❇️ Keep it simple and safe: plug into ground, keep fabrics dry, and treat the cord like any other electronic accessory.